Shell UK fined after technician struck by cylinder

Shell UK Limited has today been fined for health and safety breaches after a technician was struck by a cylinder and left severely injured on the Brent Delta offshore installation.

Aberdeen Sheriff Court heard how, on 10 November 2014, technicians were required to replace a gas cylinder within a system used to extinguish fires. When one of the technicians rolled what he thought was an empty cylinder along the floor and took off the protective cap, he realised that it was a fully charged cylinder. The trigger mechanism on the cylinder was activated causing a loud bang and the instantaneous release of the cylinder contents in a white cloud of concentration. The force of the gas release caused the technician to drop the cylinder to the floor causing a valve to shear. This resulted in both cylinder and valve becoming projectiles which struck and severely injured a second technician.

An investigation by the Health and Safety Executive (HSE) found the company failed to take suitable and sufficient steps to ensure risks associated with handling of pressurised cylinders were eliminated. The company also failed to remove pressurised cylinders which were not suitable for use in a safe and secure manner and also failed to ensure the provision of appropriate information and instruction in respect of the handling and use of energised gas cylinders.

Shell UK Limited of Shell Centre, London pleaded guilty to breaching Section 3(1) of the Health and Safety at Work etc Act 1974 and was fined £60,000.

Speaking after the hearing, HSE inspector David Josiah said:  “This incident could so easily have been avoided by simply carrying out correct control measures and safe working practices.

“Companies should be aware that HSE will not hesitate to take appropriate enforcement action against those that fall below the required standard.”

Notes to Editors:

  1. The Health and Safety Executive (HSE) is Britain’s national regulator for workplace health and safety. We prevent work-related death, injury and ill health through regulatory actions that range from influencing behaviours across whole industry sectors through to targeted interventions on individual businesses. These activities are supported by globally recognised scientific expertise. www.hse.gov.uk
  2. More about the legislation referred to in this case can be found at: www.legislation.gov.uk/
  3.  HSE news releases are available at http://press.hse.gov.uk

Journalists should approach HSE press office with any queries on regional press releases.




Shell UK fined after technician struck by cylinder

The page you requested does not exist…

…but we think we can help you

You may not be able to find this page because of:

  1. An out-of-date bookmark/favourite
  2. A search engine that has an out-of-date listing for us
  3. A mis-typed address

Please try one of the following pages:




Peterborough company fined for failing to undertake asbestos assessment

A property management company has today been sentenced after failing to carry out an asbestos survey prior to undertaking extensive refurbishment works.

Huntingdon Magistrates’ Court heard how, between April and May 2017, Thistlemoor Healthcare and Management Ltd undertook construction work at two properties, one of which was part of a medical centre in Peterborough. In this time, the company failed to carry out an asbestos survey for either property, both of which were likely to contain asbestos.

An investigation by the Health and Safety Executive (HSE) found the company undertook and carried out construction which was likely to disturb asbestos containing materials during the strip out and part demolition of the two properties. Despite this, the company failed in its duty to carry out an asbestos survey for either property.

Thistlemoor Healthcare and Management Ltd of Thistlemoor Road, Peterborough pleaded guilty to breaching Regulation 5 of Control of Asbestos Regulations 2012 and has been fined £15,000 and ordered to pay costs of £1,805.60.

Speaking after the hearing, HSE inspector Samantha Wells said: “The risk of exposure to asbestos could so easily have been avoided if the company had carried out a suitable and sufficient asbestos assessment to identify the presence of asbestos within properties prior to commencing refurbishment work.

“Companies should be aware HSE will not hesitate to take appropriate enforcement action against those that fall below the required standards.”

Notes to Editors:

  1. The Health and Safety Executive (HSE) is Britain’s national regulator for workplace health and safety. We prevent work-related death, injury and ill health through regulatory actions that range from influencing behaviours across whole industry sectors through to targeted interventions on individual businesses. These activities are supported by globally recognised scientific expertise. hse.gov.uk
  1. More about the legislation referred to in this case can be found at: legislation.gov.uk/
  1. HSE news releases are available at http://press.hse.gov.uk

Journalists should approach HSE press office with any queries on regional press releases.




Construction firm and director fined for safety breaches

A company and its director have been fined for failure to comply with a prohibition and improvement notice.

Southwark Crown Court heard how, on 31 March 2016, Awad (UK) Ltd, under the control of its director Andrzej Wilk, was issued with a prohibition notice on site where it was found that persons were at serious risk of fall and injury from the unprotected edges at the site. The court also heard that the company was issued with an improvement notice on 4 April 2016 for failure to provide adequate and suitable welfare facilities at the site.

An investigation by the Health and Safety Executive (HSE) found Awad (UK) Ltd and Andrzej Wilk had not taken steps to comply with the prohibition notice preventing any work near the open edges where there was a risk of fall and injury to persons. The investigation also found that Awad (UK) Ltd and Andrzej Wilk had not complied with the improvement notice requiring the provision of adequate and sufficient welfare facilities.

Awad (UK) Ltd of Fourth Way, Wembley, Middlesex pleaded guilty to breaching Regulation 6(3) of the Work at Height Regulations 2005 and Section 21 and 22 of the Health & Safety at Work etc Act 1974. The company has been fined £37,500 and ordered to pay costs of £10,000.

Andrzej Wilk of Beresford Avenue, Surbiton pleaded guilty to breaching Section 37 of the Health and Safety at Work etc. Act 1974 ands was fined £7,500 and ordered to pay costs of £10,000.

Speaking after the case, HSE inspector Saif Deen said: “The risks associated with working at height and the requirement to provide adequate welfare facilities are well-known throughout the construction industry.

“In this case, the company and its director failed to comply with HSE’s enforcement action and continued to put persons at risk of serious injury.”

Notes to Editors:

  1. The Health and Safety Executive (HSE) is Britain’s national regulator for workplace health and safety. We prevent work-related death, injury and ill health through regulatory actions that range from influencing behaviours across whole industry sectors through to targeted interventions on individual businesses. These activities are supported by globally recognised scientific expertise. hse.gov.uk
  2. More about the legislation referred to in this case can be found at: legislation.gov.uk/
  3. HSE news releases are available at http://press.hse.gov.uk

 

Journalists should approach HSE press office with any queries on regional press releases.




North Yorkshire company fined after contractor falls from height

A company specialising in the installation of biomass heating systems and photovoltaic solar systems was sentenced today after a worker suffered a serious injury following a fall from height.

Beverley Magistrates court heard how, on 27 March 2015, an operative was installing a flue system for a biomass heating system at a farm in North Yorkshire. He had attempted to work from a ladder at the side of the outbuilding but when this proved ineffectual, he resorted to climbing onto the roof to complete the works. Whilst working on the roof, the operative fell a distance of around 2 metres through the fragile cement sheet, suffering injuries including broken bones in the left ankle.

An investigation by the Health and Safety Executive (HSE) found the company had failed to adequately plan the installation of the heating system and the necessary work at height. Furthermore, the investigation found the company failed to provide suitable work at height equipment such as a mobile elevated work platform, edge protection, crawl boards, a roof ladder or scaffolding.

Duncan Plumbing Heating and Electrics Ltd of Rudgate Business Park, Tockwith, North Yorkshire pleaded guilty to breaching Section 2(1) of the Health and Safety at Work etc. Act 1974 and has been fined £32,000 and ordered to pay £2,424.60 in costs

 After the hearing, HSE inspector James Harvey commented: “Work at height, such as roof work, is a high-risk activity that accounts for a high proportion of workplace serious injuries and fatalities each year.

“This case highlights the importance of following well-known industry guidance to plan and assess the work at height requirements needed to complete the work safely.”

Notes to Editors:

  1. The Health and Safety Executive (HSE) is Britain’s national regulator for workplace health and safety. We prevent work-related death, injury and ill health through regulatory actions that range from influencing behaviours across whole industry sectors through to targeted interventions on individual businesses. These activities are supported by globally recognised scientific expertise. hse.gov.uk[1]
  2. More about the legislation referred to in this case can be found at: legislation.gov.uk/ [2]
  3. HSE news releases are available at http://press.hse.gov.uk[3]

 

Journalists should approach HSE press office with any queries on regional press releases.