Press release: MOD confirms the death of Corporal Jonathan Bayliss, Royal Air Force Aerobatic Team (The Red Arrows)

Corporal Bayliss was killed when the Hawk T1 aircraft he was flying in crashed at RAF Valley at approximately 1330hrs on Tuesday 20 March 2018.

A Police investigation and a full Service Inquiry into the crash has been initiated. It would be inappropriate to speculate on the causes of the incident at this time.

Sergeant Will Allen, a close colleague of Corporal Jon Bayliss and the leader of the Red Arrows’ group of travelling support engineers, known as the Circus, for 2018 said:

Jon had the ability to motivate and inspire a team and those around him – no matter the rank, role or person. He was so proud to have been chosen to join the Circus team for 2018 and, in being one of the small group of engineers whose job it was to fly in a Red Arrows jet, had fulfilled a schoolboy dream.

Jon had a big a presence on the Squadron and with his wide beaming smile, and dry humour, could lighten up any dull moment or lift spirits when needed. Both inside and outside of work, he was a generous, kind and caring man who could also always be relied upon.

Having worked with Jon both at the Red Arrows and elsewhere in the Royal Air Force, I know how tirelessly he approached each task and was, what many would describe, a genuine grafter.

Squadron Leader Richard Bland, Senior Engineering Officer of the Royal Air Force Aerobatic Team, the Red Arrows, said:

Everyone on the team has a great story about Jon and, without exception, he was known as a top bloke with an infectious smile, cheeky grin and possessing a dry sense of humour that had the ability to fill a room with laughter. At the same time, Jon was the ultimate professional and embodiment of excellence. As the leader of a team responsible for replenishing the jet’s dye systems last year, he led exceptionally well, looking after his team mates selflessly and was a true inspiration.

We have been touched by the messages of condolence received from the wider Air Force, from people who knew Jon across ranks and trades and it is clear people loved him. As a skilled leader, ambassador for the Royal Air Force and knowledgeable technician, Jon had all of the attributes and qualities that define the Red Arrows.

Wing Commander Andrew Keith, Officer Commanding, Royal Air Force Aerobatic Team, the Red Arrows said:

The thoughts of each and every member of the Red Arrows team are with Corporal Jonathan Bayliss’ family and friends. He was a dedicated, skilled and experienced Royal Air Force engineer who we will miss deeply. As a highly-trained technician, Corporal Bayliss made a huge contribution to ensuring the Red Arrows’ aircraft were able to carry out displays and flypasts to millions of people across the globe and I know how proud he was to be part of that team effort.

Corporal Bayliss was a popular colleague and someone whom others looked up to, being able to draw inspiration from his knowledge and strength of character. The Red Arrows family is a close one – the Squadron is a small team who live and work side-by-side and the overwhelming number of condolence messages, received from around the world, have been enormously comforting to us all and we are very grateful for that.

Air Vice-Marshal Warren James CBE, Air Officer Commanding (AOC) 22 Group – of which the Royal Air Force Aerobatic Team is part of – said:

Our heartfelt condolences go to Corporal Jonathan Bayliss’ partner and family at what is a terrible, tragic time. His death has understandably come as a great shock to his colleagues and fellow team mates at the Red Arrows. The incident is a reminder of the risk present with all types of flying but also of the hard work and commitment shared by both air and ground crews alike.

All of our thoughts are now with Corporal Bayliss’ family, friends and his colleagues as they try to come to terms with his loss and investigations take place into establishing what happened.

Defence Secretary Gavin Williamson said:

It is with deep sadness that I heard of the death of Corporal Jonathan Bayliss whilst flying with the Red Arrows on Anglesey. It’s clear from his colleagues that he was an incredibly skilled engineer and held in the highest regard as a teammate, a friend, and a shining example of what the British Armed Forces stand for. Our thoughts and prayers are with his family and loved ones at this terrible time.

Corporal Jonathan Bayliss, 41, was an Aircraft Technician (Mechanic) with the Royal Air Force Aerobatic Team.

He was born in Dartford, Kent and grew up in Hartley. He attended Axton Chase School in Longfield and studied at West Kent College before going on to complete a HND in engineering management at the University of Greenwich.

Before joining the Royal Air Force in 2001, he worked at Brands Hatch motor racing circuit.

Prior to becoming a member of the Red Arrows team in January 2016, Corporal Bayliss’ Royal Air Force career involved working on squadrons at RAF Coltishall and RAF Coningsby as well as on overseas deployments.

As a mechanical engineer with the Red Arrows, he had supported successful tours to the Far East, including China, as well as the Middle East and mainland Europe.

In 2017 he was a leader of the Red Arrows’ dye team, helping to replenish the jets’ famous smoke systems wherever they landed.

For 2018, he had been selected to be one of the Circus team – the small group of highly-trained engineers who travel with the aircraft and provide technical support to the Red Arrows when the aircraft operate away from their home base.

Bayliss 2
Corporal Jonathan Bayliss



Company fined after worker injured

A manufacturer of agricultural equipment has been fined after a worker suffered two broken legs when a stack of metal sheets fell onto his ankles.

High Wycombe Magistrates’ Court heard how an employee of K Two Sales Ltd accessed the rear of a guillotine to measure some off-cuts. There were around 20 sheets of 4mm thickness stacked on top of each other.  He tried to remove one of them causing the whole stack to fall on him.

An investigation by the Health and Safety Executive (HSE) into the incident, which occurred on 10 January 2017, found the steel sheets were being stored without adequate means to prevent them from falling.

K Two Sales Ltd of Station Road, Haddenham, Bucks pleaded guilty to breaching Section 2(1) of the Health & Safety at Work etc Act 1974 and has been fined £22,000 and ordered to pay full costs of £1,647.20.

Speaking after the case, HSE inspector Stephen Faulkner said: “This injury could have easily been prevented had the risk should have been identified.

“Companies should be aware that HSE will not hesitate to take appropriate enforcement action against those that fall below the required standards”.

 Notes to Editors:

  1. The Health and Safety Executive (HSE) is Britain’s national regulator for workplace health and safety. We prevent work-related death, injury and ill health through regulatory actions that range from influencing behaviours across whole industry sectors through to targeted interventions on individual businesses. These activities are supported by globally recognised scientific expertise. hse.gov.uk
  2. More about the legislation referred to in this case can be found at: legislation.gov.uk/ and www.hse.gov.uk/pUbns/priced/hsg246.pdf
  3. HSE news releases are available at http://press.hse.gov.uk

Journalists should approach HSE press office with any queries on regional press releases.




News story: Multi-million-pound contract to enhance Royal Navy Type 45 fleet resilience

The Power Improvement Project (PIP) will enhance the resilience of the Type 45 class by installing additional power generation sources in each ship. Delivered as a major conversion project, the PIP will replace the two existing generators with three larger units capable of delivering the ships propulsion.

The contract has been awarded to BAE Systems, in collaboration with BMT Defence services and Cammell Laird. The physical conversion work will be conducted at Cammell Laird’s ship yard in Birkenhead, Merseyside, sustaining more than 100 highly skilled jobs.

The PIP contract covers the design and integration of the technical solution, supply of equipment and physical installation into all six Type 45 destroyers.

The contract forms part of Project Napier which was established in 2014 and builds on the work carried out in the first strand of the project, known as the Equipment Improvement Plan which addresses the reliability of existing equipment.

Director Ships Support at the MOD’s Defence Equipment and Support organisation, Neal Lawson said:

This contract demonstrates our ability to collaborate effectively with industry and I am extremely pleased with how the team at DE&S have worked rapidly to meet requirements.

The PIP will ensure the fleet of highly sophisticated Type 45s can continue to be deployed successfully on operations around the globe, protecting the UK’s interests worldwide.

The Power Improvement Project demonstrates how the MOD is delivering on the commitment as outlined in the last Strategic Defence and Security Review, to provide a robust solution to the power and propulsion issues observed in Type 45.

The first of class conversion is expected to complete in 2021, with follow on ships completed during the early 2020s. The programme is dependent on the availability of ships to undertake the conversion, balanced against the Royal Navy’s standing and future operational commitments.




ESMA publishes translations for Guidelines on stress tests scenarios under Article 28 of the MMF Regulation

21 March 2018

Fund Management

Guidelines and Technical standards

The European Securities and Markets Authority (ESMA) has issued today the official translations of its Guidelines on stress tests scenarios under Article 28 of the MMF Regulation.

National Competent Authorities (NCAs) to which these Guidelines apply must notify ESMA whether they comply or intend to comply with the Guidelines, within two months of the date of publication by ESMA of the Guidelines in all EU official languages.




ESMA publishes translations for Guidelines on stress tests scenarios under Article 28 of the MMF Regulation

21 March 2018

Fund Management

Guidelines and Technical standards

The European Securities and Markets Authority (ESMA) has issued today the official translations of its Guidelines on stress tests scenarios under Article 28 of the MMF Regulation.

National Competent Authorities (NCAs) to which these Guidelines apply must notify ESMA whether they comply or intend to comply with the Guidelines, within two months of the date of publication by ESMA of the Guidelines in all EU official languages.