The Health and Safety Executive (HSE) is advising healthcare workers currently using respiratory protective equipment (RPE) on the importance of ensuring it is fitted correctly. A respirator that is incorrectly fitted will not protect the wearer.

Tight-fitting respirators rely on having a good seal with the wearer’s face. It is vital that before using a respirator for the first time, or before using a different brand of respirator, wearers pass a fit test for the model and size of respirator they are going to use. This is to make sure the equipment fits to their particular facial characteristics.

In these unprecedented times, to protect front line health care workers and reduce the risk of transmission during the coronavirus outbreak, if support is required in carrying out a fit test, it should be done following government advice on social distancing. This means making sure instructions are delivered verbally and observations are made from a distance of two metres (6ft) where possible. If closer observation is required, those being fitted should keep their respirator on to minimise the risk of transmission.

Once the wearer has been fit tested for the model of respirator they intend to use, they must ensure they have put it on correctly to protect themselves and others. Wearers should follow three simple steps: R-P-E

Read the guidance

HSE has step-by-step guidance on the correct way to fit the respirator and carry out a fit check. Wearers must familiarise themselves with the guidance and follow the manufacturer’s instructions when fitting their equipment.

Put your respirator on using a mirror

When fitting a respirator, wearers must make sure the straps are in the correct place and are not twisted or crossed over. The easiest way to do this is using a mirror.

Ensure your own safety

Dr David Fishwick, Chief Medical Adviser for HSE and respiratory physician said: “Before entering the workplace, wearers must carry out a fit check to ensure their respirator is on correctly. This allows the wearer to check they are experiencing no leakage around the face seal, and that they have put the respirator on correctly.”

Andrew Curran, Chief Scientific Adviser for HSE said: “Ensuring RPE is put on correctly is crucial. Any gaps between the wearer’s face and the mask face seal, whether through incorrect moulding of the nose clip or by facial hair, will compromise the protection of the wearer.

“Users must ensure they have been fit tested for the size and model of respirator they are going to use, and that they carry out a fit check each time RPE is used.”

For further information, see HSE’s related RPE videos. You can also sign up to our newsletter to receive updates and ongoing information.

Notes to editors

1. The Health and Safety Executive (HSE) is Britain’s national regulator for workplace health and safety. We prevent work-related death, injury and ill health through regulatory actions that range from influencing behaviours across whole industry sectors through to targeted interventions on individual businesses. These activities are supported by globally recognised scientific expertise. www.hse.gov.uk
2. For further information, see HSE’s guidance on coronavirus

The post HSE advises on the importance of fitting RPE correctly appeared first on HSE Media Centre.

This is an extremely worrying time for businesses and workers. We know many workers, union reps and employers have questions and concerns about safe working – especially for those continuing to attend a place of work away from their homes.

This statement by the Partnership on Health and Safety in Scotland¹ (PHASS) is intended to clarify the position. The health and safety of workers remains paramount. Employers are and must continue to provide workers with information about risks to their health and the actions their employers must take.

We have high expectations of how fair work principles should be applied during the current crisis. This means an approach where workers, trade unions and employers work together constructively to reach the right decisions on all workplace issues that arise throughout this crisis.  The dimensions of fair work as defined by the Fair Work Convention: effective voice; security; respect; opportunity and fulfilment, applied to the current context, offer a framework for taking these decisions.

Social distancing is a key public health measure supported by the Scottish Government to reduce the spread of infection but certain businesses are required to close by law.  Businesses unsure of the guidance should visit: https://www.gov.scot/news/social-distancing-guidance-for-business/.  Those that can safely stay open, keeping the country running, must also follow government guidance.

Most employers are going to great lengths to ensure social distancing.  PHASS wishes to publicly support these efforts.  But if it comes to the HSE’s attention that employers are not complying with the relevant public heath guidance (by enabling social distancing when it is practical to do so before personal protective measures), HSE will consider a range of actions ranging from providing specific advice to employers through to issuing enforcement notices, including prohibition notices.  Local authorities also have enforcement powers in specific premises under health and safety legislation and also powers – including to be able to close non-essential businesses – under new public health Coronavirus legislation in Scotland.

Where a worker has a genuine concern about health and safety which cannot be resolved through speaking with their employer or trade union, they should contact the relevant enforcement agency – either their local authority, or the HSE through https://www.hse.gov.uk/contact/concerns.htm

———————-

¹ British Occupational Hygiene Society, CBI Scotland, , Federation of Small Business, Scotland, Health and Safety in the Voluntary Sector Scotland, Heath and Safety Executive, Institution of Occupational Safety and Health, Professional Organisations in Occupational Safety and Health in Scotland, Public Health Scotland, Royal Environmental Health Institute of Scotland, Scottish Council for Development and Industry, Scottish Government, Scottish Hazards, Society of Chief Environmental Health Officers, Scotland, Society of Personnel Directors, Scotland, STUC.

ENDS

The post Coronavirus – A joint statement with The Partnership on Health and Safety in Scotland appeared first on HSE Media Centre.

This is an extremely worrying time for firms and workers. We know many workers, union reps and employers have questions and concerns about safe working – especially for those continuing to work away from home.

This joint statement between the Health and Safety Executive, the TUC and the CBI is intended to clarify the position. The health and safety of workers remains paramount. Employers are and must continue to provide workers with information about risks to their health and the actions their employers must take.

Social distancing is a key public health measure introduced by Public Health England to reduce the spread of infection. Most employers are going to great lengths to ensure social distancing wherever possible. The HSE, CBI and TUC wish to publicly support these efforts. Firms that can safely stay open and support livelihoods should not be forced to close by misunderstandings about government guidance.

But If it comes to the HSE’s attention that employers are not complying with the relevant Public Health England guidance (including enabling social distancing where it is practical to do so), HSE will consider a range of actions ranging from providing specific advice to employers through to issuing enforcement notices, including prohibition notices.

Where a worker has a genuine concern about health and safety which cannot be resolved through speaking with their employer or trade union, they should contact the relevant enforcement agency – either their local authority, or the HSE through https://www.hse.gov.uk/contact/concerns.htm

For firms who are unsure about the guidance, please visit https://www.hse.gov.uk/news/social-distancing-coronavirus.htm

ENDS

The post Coronavirus: A joint statement between HSE, the TUC and the CBI appeared first on HSE Media Centre.

The Health and Safety Executive (HSE) has taken steps to support hand sanitiser manufacturers as UK production is increasing to tackle Coronavirus.

Due to unprecedented demand for biocidal hand sanitiser products during the coronavirus outbreak, HSE is providing derogations that will assist the UK manufacture and supply of biocidal hand-sanitiser products that use propanol as their active ingredients.

During the temporary exemption, biocidal hand sanitiser products containing Propan-2-ol will not be required to obtain a product authorisation if they meet the relevant WHO-specified formulation II.

Article 55 (1) of the Biocidal Products Regulation (BPR) enables HSE, in cases of danger to public health, animal health or the environment which cannot be contained by other means, to provide short term derogations from the requirements for product authorisation.

Manufacturers in scope of the derogation should read the advice provided in the link below.

Dr Richard Daniels, HSE’s Chemicals Regulation Director said: “It is vital that workers and members of the public are able to protect themselves and others from the spread of Coronavirus. The correct use of safe and effective biocidal hand sanitisers are part of the range of government measures to protect the NHS and UK citizens.

“Amid this national effort, we are working closely with other government agencies, manufacturers and their trade associations to help remove obstacles to the manufacture and supply of safe and effective biocidal hand sanitiser products and reduce supply chain issues.

“While this action will enable manufacturers to place hand sanitiser products on the UK market quickly, we still expect them to meet their responsibilities to adhere to the correct standards which protect the people and the environment from potentially harmful chemical effects.”

HSE’s updated guidance has been published on https://www.hse.gov.uk/news/hand-sanitiser-manufacture-supply-coronavirus.htm

Notes to editors

1. The Health and Safety Executive (HSE) is Britain’s national regulator for workplace health and safety. We prevent work-related death, injury and ill health through regulatory actions that range from influencing behaviours across whole industry sectors through to targeted interventions on individual businesses. These activities are supported by globally recognised scientific expertise. www.hse.gov.uk
2. More about the legislation referred to in this case can be found at: www.legislation.gov.uk/
3. HSE news releases are available at http://press.hse.gov.uk
4. Visit HSE Biocides website^[5].

The post HSE issues exemption for the manufacture and supply of biocidal hand sanitiser products in the UK appeared first on HSE Media Centre.

A manufacturing company has been fined after an employee’s arm was dragged into a press roller.

Chelmsford Magistrates’ Court heard that on 19 June 2019, an agency worker at E.G.L. Homecare Limited suffered a severe crush injury to his arm as he attempted to remove dirt from a press roller at the address on Campfield Road, Shoeburyness. He was working on a production line that glued sponge to abrasive sheets to make scourer sponges. His job was to remove the sheets of scourer sponges from the conveyor onto a pallet when his right hand got dragged into the nip point of two in-running rollers up to his shoulder. He was diagnosed with forearm compartment syndrome, a painful condition caused by bleeding or swelling within an enclosed bundle of muscles. He had an operation on his arm and had to stay in hospital for six days.

An investigation by the Health and Safety Executive (HSE) found that the company failed to provide a tunnel guard on the press roller to prevent access to the rollers.

E.G.L. Homecare Limited of Campfield Road, Shoeburyness has pleaded guilty of Regulation 11(1) of the Provision and Use of Work Equipment Regulations 1998. The company has been fined £80,000 and ordered to pay costs of £5,314.08.

Speaking after the case, HSE inspector Carla Barron, said: “This incident could have been avoided had the company properly assessed the guarding arrangements on the machine when it was installed. Unfortunately access to in-running rollers is a common cause of injury but it can be easily avoided by providing effective control measures such as the provision of tunnel guards.”

Notes to Editors:

1. The Health and Safety Executive (HSE) is Britain’s national regulator for workplace health and safety. We prevent work-related death, injury and ill health through regulatory actions that range from influencing behaviours across whole industry sectors through to targeted interventions on individual businesses. These activities are supported by globally recognised scientific expertise. www.hse.gov.uk
2. More about the legislation referred to in this case can be found at:www.legislation.gov.uk/
3. HSE news releases are available at http://press.hse.gov.uk
4. Picture illustrates the press roller with and without a guard.

The post Manufacturer fined after an agency worker was dragged into a press roller appeared first on HSE Media Centre.